Module Information

Model: RC-TASK2-868

Description: 

ASK/OOK transmitter module with Crystal oscillator.

 

Vdc: 2.2 ÷ 3.6Volt

Current:  21/15mA

Frequency: 868.30MHz​

Power : 10dBm

Dimension: 20.32 x 11.43mm 

Model: RC-TFSK3-434

Description:

433.92MHz FSK Radio Transmitter Module - Standard Pinout .

 

 

Vdc: 2.4 ÷ 3.6Volt

Current: 14.5m

Frequency: 433.92MHz

Powe : 10dBm

Dimension: 20.32 x 11.43mm

 

Model: RC-TFSK4-434

Description :

433.92MHz FSK Transmitter Module - Standard Pinout.

 

 

Vdc: 2.4 ÷ 3.6Volt

Current: 14.5mA

Frequency: 433.92MHz

Power :  10dBm

Dimension: 30.5 x 10.3mm

Reference Schematics

qq.jpeg

New

New

image-781
image-781
image-781
image-781
image-781
image-630
logo 2023bianco

facebook
twitter
linkedin
youtube
whatsapp
logo 2023bianco

Download catalog

Follow us on :

Phone : +39 0823 522185

Mobile : +39 333 4156216

sales@radiocontrolli.com

Via Santagata 73

Centro Direzionale Contemporanea

81055 Santa Maria C.V. (CE)

ITALY

 

 


facebook
twitter
linkedin
youtube
whatsapp

. IoT 

© 2021 RadioControlli S.r.l.  VAT IT03939360610 All right reserved.

RF-CC1310-AT

rf-cc1310-2.jpeg

- Sub 1GHz Multifunction Radio Modem 

- Over The Air Commands

- Remote I/O Functionality

- Listen Before Send (LBS) Functionality

The RF-CC1310-AT module is a module with multiple features:

 

 

- It is a wireless radio modem with AT commands, providing an RS232

   wireless link with an RF data rate of up to 200 kbps (modulation 2-GFSK).

 

- The module has the ability to manage 2 digital outputs and 2 digital inputs

   both locally and remotely (OTA Over The Air Command) via sending       

   simple AT commands.



- Remote I/O functionality, this is a type of transmission bidirectional used 

   in the field of automatic controls. When you enable this, every time the 

  digital input changes state on station A, also the digital output of remote 

  station B it will reflect these states simultaneously and vice versa.

 

 - Listen Before Send" (LBS) is a protocol used in radio frequency (RF)          communications to avoid interference and ensure efficient use of the  spectrum. Before transmitting data, a device listens to the channel to check  if it is free. If the channel is clear, the device proceeds to send its data.  However, if the channel is occupied, the device waits until it becomes  available. This approach helps prevent collisions between signals, reduces t  the likelihood of communication errors, and ensures more reliable and  efficient communication in environments with multiple transmitting  devices. 

Datasheet

The hardware is based on the RF-CC1310 module designed by RadioControlli.

 

CORE : CC1310 from Texas Instruments

Operative Fequency bands  : 868/915MHz.

SMD Mounted     Mechanical Dimension : 13 x 13mm

Metallic shield.

 

For further information and details, refer to the datasheets :

- RF-CC1310  (www.radiocontrolli.com)

- CC1310       (www.ti.com) 

Ta = 25°C unless otherwise specified

Technical Characteristics
Min
Typ
Max
Unit
Supply Voltage
1.80
3.0
3.6
Volt
Current Consumption (RX mode)
5.80
mA
Current Consumption (TX Mode +10dBm)
13.4
mA
Current Consumption (TX Mode +14dBm)
24.9
mA
Current Consumption Sleep Mode
2.0
µA
Frequency Range
868/915
MHz
RF Output Power
-10
+14
dBm
RF Sensitivity (50Kbit/sec Data rate)
-110
dBm
Operating Range Temperature 
-20
+70
°C
layout.jpeg

Mechanical Dimension

misure.jpeg

 

  Radio Modem

- Radio Modem with AT Command (Transparent transmission protocol)

 

 The RF modem is very simple to use and provides an RS232 wireless connection with an RF data rate of up to 200 kbps. This transceiver has the functions of a full radio modem requires data in CMOS / TTL format on the UART TX input and returns the same data on the UART RX remote unit. Preamble and CRC are automatically generated and added to the radio frequency transmission. 

 

screenhunter_1630 apr. 16 16.32.jpeg

  OTA Commands

 - Over The Air commands (OTA Commands)

 

The module has the ability to manage 4 digital outputs and 4 digital inputs both locally and remotely (Over The Air Commands) by sending simple AT commands.

screenhunter_1631 apr. 16 16.33.jpeg

  ALARM FUNCTION

 -  Alarm

 

 With this function, when a digital input change status (DEVICE A)  a message will be transmitted via UART to the DEVICE B :  “Alarm_0_1 ”
                       

screenhunter_1632 apr. 16 16.34.jpeg

 

 

  Remote I/O Function

- Remote I/O 

 

 It is possible Turn ON and turn OFF the remote IO mirroring function.
When we enable the Remote I/O function, if any Digital Input is change on the Station A, the digital output of the remote Station B will also mirror these states at the same time.

screenhunter_1633 apr. 16 16.38.jpeg

 

 

  The Evaluation Board 

 

 The Evaluation Kit consists of:

 

- N.2 Evaluation Board with SMA Antenna

- N.2 USB cables

 

With this development kit it is possible to verify all the features and functionalities of the RF-CC1310-AT module.

evaluation
rf-cc1310-at2

Information Request:

Download Datasheet

Would you be interested in :

RCQ3_1606924236089RCQ3_1606924281277rcq32_1606924422354rcq32_1606924483764rcq2_1606924532933RCS1KSMT_1607002594242