Module Information
Model: RC-TASK2-868
Description:
ASK/OOK transmitter module with Crystal oscillator.
Vdc: 2.2 ÷ 3.6Volt
Current: 21/15mA
Frequency: 868.30MHz
Power : 10dBm
Dimension: 20.32 x 11.43mm
Model: RC-TFSK3-434
Description:
433.92MHz FSK Radio Transmitter Module - Standard Pinout .
Vdc: 2.4 ÷ 3.6Volt
Current: 14.5m
Frequency: 433.92MHz
Powe : 10dBm
Dimension: 20.32 x 11.43mm
Model: RC-TFSK4-434
Description :
433.92MHz FSK Transmitter Module - Standard Pinout.
Vdc: 2.4 ÷ 3.6Volt
Current: 14.5mA
Frequency: 433.92MHz
Power : 10dBm
Dimension: 30.5 x 10.3mm
Reference Schematics
New
New
Download catalog
Follow us on :
Phone : +39 0823 522185
Mobile : +39 333 4156216
sales@radiocontrolli.com
Via Santagata 73
Centro Direzionale Contemporanea
81055 Santa Maria C.V. (CE)
ITALY
. IoT
© 2021 RadioControlli S.r.l. VAT IT03939360610 All right reserved.
RC-CC1352-868
Dual band sub 1GHz and 2.4GHz Multichannels Radio Transceiver
The RC-CC1352-XXX module is based on Texas Instruments CC1352R component. The CC1352R device is a multiprotocol Sub-1 and 2.4-GHz wireless MCU targeting Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread,Zigbee®, KNX RF,Wi-SUN®, Bluetooth® 5 low energy, and proprietarysystems.
N.2 Versions available :
- RC-CC1352-868 Freq. : 868MHz
- RC-CC1352-915 Freq. : 915MHz
Datasheet
3D Files
PCB Files
The CC1352R device is a member of the CC26xx and CC13xx family of cost-effective, ultra-low power, 2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition to sub-µA sleep current with up to 80KB of RAM retention, provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.
The CC1352R device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352R device does not come at the expense of RF performance; the CC1352R device has excellent sensitivity and robustness (selectivity and blocking performance).
| Technical Characteristics (Sub 1GHz) | Min | Typ | Max | Unit |
| Supply Voltage | 1.8 | 3.0 | 3.6 | Volt |
| Current Consumption (RX mode) | | 8.10 | | mA |
| Current Consumption (TX Mode +10dBm) | | 13.40 | | mA |
| Current Consumption (TX Mode +14dBm) | | 24.00 | | mA |
| Current Consumption Stand by Mode | | 0.1 | | µA |
| RF Output Power (*) | | +14 | | dBm |
| Operative Frequency | | 915 | | MHz |
| RF Sensitivity (Data Rate 50kbps) | | -110 | | dBm |
| Long Range RF Sensitivity (Data Rate 2.5Kbps) | | -122 | | dBm |
| Data Rate | 0.01 | | 4.0 | Mbit/s |
| Operating Range Temperature | -30 | | 75 | °C |
Ta = 25°C unless otherwise specified
(*) Programmable parameter
Microcontroller
- Power Arm Cortex - M4F processor
- Up to 48MHz Clock Speed
- 352KB of On-System Programming Flash
- 256KB of ROM for Protocol and Firmware
- 8KB od SRAM for Cache (or as General-Purpose RAM)
- 80KB of Ultralow Leakege SRAM
- Support Over-the-Air Upgrade (OTA)
For more information and details consult the datasheet of the CC1352 chip from Texas Instruments website.
Pin Outs
Mechanical Dimension
Reference Schematic
To make immediate usable the RC-CC1352-915 module with Texas Instruments development systems has been realized the following adapter :
The module including adapter is called RC-CC1352-915-EV, it can be immediately used with the evaluation board
SMART RF 06 from Texas Instruments.
Information Request:
Download Datasheet
Link to Buy Samples
RC-CC1352-915
Link to Buy Samples
RC-CC1352-915-EV (with adapter)
Would you be interested in :
