RC-CC1310F-XXX

iot modules

RC-CC1310F-XXX

Ultra Low Power sub 1GHz Multichannels Radio Transceiver  + 16M-bite Flash memory

The RC-CC1310F-XXX module is based on Texas Instruments CC1310F128 component more a 16Mbit of serial flash memory.

This device combines a flexible, very low power RF transceiver with a powerful 48 MHz Cortex M3 microcontroller in a platform
supporting multiple physical layers and RF standard.

Compared to the standard module (RC-CC1310-XXX) the "F" version has on board a 16M-bite serial flash memory (GD25Q16CEIG),
programmable through SPI interface already cabled inside.

The external flash can be used for :  

-          To store and collect data.

-          Memorize images which at boot time can be loaded into internal flash using a boot image manager.

There is an application developped on this module (free to use for everyone) where you can verify and make the download of the source in C, see the following hyperlink :  https://github.com/joembedded/JesFs .

Sub-1Ghz technology is becoming one of the chief driving forces behind the Internet of Things (Iot) the main benefits of this technology are:

The low power consumption has always been the predominant feature of the sub 1GHz applications, with new technologies we consumption in sleep mode of less than 1 uA. The consumption of this device is 5.5mA when receiving and    23.5mA when transmitting at +14dBm (13.4mA at +10dBm) in sleep mode the consumption is 0.6µA (microamps).

The Long Range has become a reality because with new technology you can reach distances of several kilometers in addition, by occupyng the ISM bands in the wireless spectrum belo 1 GHz, this communication avoids the much more crowded band at 2.4 GHZ, where Wi-Fi, Bluetooth, ZigBee and other wireless protocols operate.

The sensitivity parameter is -110dBm at data rates of 50 kbps and down to -124dBm when the data rate is 0.625kbps.Interference from other wireless communications can be overcome with 90dB of blocking. The RF output power levels can reach up to +14dBm. All this ensure a robust signaling for long range communications.

Ready for use  Small Size for SMD mounting (Dimensions 15x 22mm) - Metal shield    

 

                                                                                              
Technical Characteristics MIN TYP MAX UNIT
Supply Voltage  2.7  3.0 3.80 Volt
 Supply Current RX mode   5.5    mA
 Supply Current TX mode   -----> +10dBm   13.4     mA
 Supply Current TX mode   -----> +14dBm     23.5    mA
 Supply Current Standby Mode    0,7   µA
 Supply Current Shut Down Mode     185   nA
 Operative Frequency   434    MHz
 Frequency error   ±10   ppm
 RF Power Output 50ohm (programmable parameter)   -10   +14 dBm
 RF Sensitivity 50kbps   -110   dBm
 RF Sensitivity long range mode 625bps   -124   dBm
 Data Rate (programmable parameter) 0,01   4 Mbit/s
 Operating Temperature range -30   +75 °C


  

 

 


To make immediate usable the RC-CC1310F-868 module with Texas Instruments development systems has been realized the following adapter :

 In this way is possible to coonect directly this adapter board (with the RC-CC1310-XXX module) to the Texas Instruments development kit (see the following picture) :

 

 

 BUY ONLINE SAMPLES 868MHz                               BUY ONLINE SAMPLES 915MHz

 

Benefits of using a RadioControlli’s module


Richiesta Informazione


Acquisto Online di Campionature

We use cookies to deliver you the best experience. By browsing our website you agree to our use of cookies. Learn More