Module Information
Model: RC-TASK2-868
Description:
ASK/OOK transmitter module with Crystal oscillator.
Vdc: 2.2 ÷ 3.6Volt
Current: 21/15mA
Frequency: 868.30MHz
Power : 10dBm
Dimension: 20.32 x 11.43mm
Model: RC-TFSK3-434
Description:
433.92MHz FSK Radio Transmitter Module - Standard Pinout .
Vdc: 2.4 ÷ 3.6Volt
Current: 14.5m
Frequency: 433.92MHz
Powe : 10dBm
Dimension: 20.32 x 11.43mm
Model: RC-TFSK4-434
Description :
433.92MHz FSK Transmitter Module - Standard Pinout.
Vdc: 2.4 ÷ 3.6Volt
Current: 14.5mA
Frequency: 433.92MHz
Power : 10dBm
Dimension: 30.5 x 10.3mm
Reference Schematics
New
New
Download catalog
Follow us on :
Phone : +39 0823 522185
Mobile : +39 333 4156216
sales@radiocontrolli.com
Via Santagata 73
Centro Direzionale Contemporanea
81055 Santa Maria C.V. (CE)
ITALY
. IoT
© 2021 RadioControlli S.r.l. VAT IT03939360610 All right reserved.
RC-S2LP-XXX-EK
The RC-S2LP-XXX-EK board is based on RC-S2LP-XXX RadioControlli’s module. This module is based on STMicroelectronics chip (S2-LP) that is a sub-1 GHz ultra-low power low data-rate transceiver, suitable for ISM bands and Wireless M-Bus.
The Evaluation board can be used instead of those provided by the chip manufacter (www.st.com) denominated STEVAL-FKIXXXV2. With this board it is possible to use all the SW resources provided for the development activity, in particular :
- STSW-S2LP-DK ----> S2-LP-DK Application Notes
- STSW-S2LP-SFX-DK ----->S2-LP SigFox Demo
Datasheet
Development Kit with STEVAL-FKI868V1
Development Kit with RC-S2LP-868-EK
The RC-S2LP-XXX-EK evaluation boards are designed to work in the sub 1GHz band (433/868/915 versions).
Some features on the boards are (see the picture belowe) :
• RC-S2LP-XXX module (A)
• Two rows with Arduino compliant connectors (D1-4)
• UFL connector (B)
• A NUCLEO-L152RE or NUCLEO-L053R8 evaluation board (G)
• A jumper for RC-S2LP-XXX current measurement (H)
RC-S2LP-XXX signal test points are split across two rows which are Arduino compliant connectors: CN1, CN2 and Cn3, CN4. The RC-S2LP-XXX shield is connected to the Nucleo motherboard via the Arduino compliant connectors.
RadioControlli Module
ARDUINO Connector
| Pin | Name | CN1(D1) | CN1(D2) | CN1(D3) | CN1(D4) |
| 1 | SDO | Pin 5 (MISO) | | | |
| 2 | SDI | Pin 4 (MOSI) | | | |
| 3 | SCLK | | Pin 4(SCLK) | | |
| 4 | CSn | | | | Pin 2(CS) |
| 5 | GPIO-0 | | | | Pin 1(GPIO-0) |
| 6 | GPIO-1 | | | | Pin 3(GPIO-1) |
| 7 | GPIO-2 | | | | Pin 4 (GPIO-2) |
| 8 | GPIO-3 | | | | Pin 6 (GPIO-3) |
| 9 | GND | Pin 7 | | Pin 6,7 | |
| 10 | SDN | | Pin 8 (SDN) | | |
| 11 | GND | Pin 7 | | Pin 6,7 | |
| 12 | GND | Pin 7 | | Pin 6,7 | |
| 13 | VCC | | | Pin 4 | |
| 14 | VCC | | | Pin 4 | |
| 15 | GND | Pin 7 | | Pin 6,7 | |
| 16 | GND | Pin 7 | | Pin 6,7 | |
| 17 | GND | Pin 7 | | Pin 6,7 | |
| 18 | GND | Pin 7 | | Pin 6,7 | |
Information Request:
Download RadioControlli
Catalog
Link to Buy Samples
RC-S2LP-434-EK
Link to Buy Samples
RC-S2LP-868-EK
Link to Buy Samples
RC-S2LP-915-EK
Would you be interested in :
