Module Information

Model: RC-TASK2-868

Description: 

ASK/OOK transmitter module with Crystal oscillator.

 

Vdc: 2.2 ÷ 3.6Volt

Current:  21/15mA

Frequency: 868.30MHz​

Power : 10dBm

Dimension: 20.32 x 11.43mm 

Model: RC-TFSK3-434

Description:

433.92MHz FSK Radio Transmitter Module - Standard Pinout .

 

 

Vdc: 2.4 ÷ 3.6Volt

Current: 14.5m

Frequency: 433.92MHz

Powe : 10dBm

Dimension: 20.32 x 11.43mm

 

Model: RC-TFSK4-434

Description :

433.92MHz FSK Transmitter Module - Standard Pinout.

 

 

Vdc: 2.4 ÷ 3.6Volt

Current: 14.5mA

Frequency: 433.92MHz

Power :  10dBm

Dimension: 30.5 x 10.3mm

Reference Schematics

qq.jpeg

New

New

image-781
image-630
image-781
image-781
image-781
image-781
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 
logo 2023bianco

facebook
twitter
linkedin
youtube
whatsapp
logo 2023bianco

Download catalog

Follow us on :

Phone : +39 0823 522185

Mobile : +39 333 4156216

sales@radiocontrolli.com

Via Santagata 73

Centro Direzionale Contemporanea

81055 Santa Maria C.V. (CE)

ITALY

 

 


facebook
twitter
linkedin
youtube
whatsapp

Antenna Design Configuration

 

 

Receiver Module - Tips for antenna connection

 

1)      The receiver module must be powered from a regulated voltage.

2)      In proximity of the receiver module it is necessary to insert a ceramic decoupling capacitor (100nF).

3)      The ground plane must be completely encircle the entire receiver in particular the area of the Antenna connection (we recommend a

          minimum of 40-50mm radius).

4)      The 50ohm connection should be as short as possible

5)      For a pcb with 1.6mm thickness, the track “50ohm connection” must be 2.5mm, this track should be separated from the GND for 2mm.

6)      On the opposite side of 50ohm connection should be a ground plane.

7)      Keep the receiver module away from other components for more than 5mm.

8)      Close to the 50ohm connectione there must be no component at least for 5mm.

© 2021 RadioControlli S.r.l.  VAT IT03939360610 All right reserved.

screenhunter358-jul.-04-17.125b3ce3fb4c6a4
screenhunter357-jul.-04-17.105b3ce37f713c6

Example connection module (Receiver miniaturized)

Example connection module (Receiver with standard pin out)

 

 

Transmitter Module - Tips for antenna connection

 

1)      The transmitter module must be powered from a low voltage source, safely protected against the short circuit.

2)      In proximity of the transmitter module it is necessary to insert a ceramic decoupling capacitor.

3)      The ground plane must be completely encircle the entire transmitter in particular the area of the Antenna connection (we recommend a

          minimum of 40-50mm radius).

4)      The 50ohm connection should be as short as possible.

5)      For a pcb with 1.6mm thickness, the track “50ohm connection” must be 2.5mm, this track should be separated from the GND for 2mm.

6)      On the opposite side of 50ohm connection should be a ground plane.

7)      Keep the transmitter module away from other components for more than 5mm.

8)      Close to the 50ohm connection  there must be no component at least for 5mm.

screenhunter360-jul.-04-17.335b3ce8d9deceb
screenhunter359-jul.-04-17.325b3ce8a3e1d96

Example connection module (Transmitter with standard pin out)

Example connection module (Transmitter miniaturized)