Reference Schematics
Download catalog
. IoT
Follow us on :
Phone : +39 0823 1545993
Mobile : +39 333 4156216
sales@radiocontrolli.com
Via Santagata 73
Centro Direzionale Contemporanea
81055 Santa Maria C.V. (CE)
ITALY
RC-CC1352-868
CC1352 Module
Dual band sub 1GHz and 2.4GHz Multichannels Radio Transceiver
The RC-CC1352-XXX module is based on Texas Instruments CC1352R component. The CC1352R device is a multiprotocol Sub-1 and 2.4-GHz wireless MCU targeting Wireless M-Bus, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread,Zigbee®, KNX RF,Wi-SUN®, Bluetooth® 5 low energy, and proprietarysystems.
N.2 Versions available :
- RC-CC1352-868 Freq. : 868MHz
- RC-CC1352-915 Freq. : 915MHz
Datasheet
© 2021 RadioControlli S.r.l. VAT IT03939360610 All right reserved.
New
New
New
The CC1352R device is a member of the CC26xx and CC13xx family of cost-effective, ultra-low power, 2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition to sub-µA sleep current with up to 80KB of RAM retention, provide excellent battery lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.
The CC1352R device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352R device does not come at the expense of RF performance; the CC1352R device has excellent sensitivity and robustness (selectivity and blocking performance).
The standard version RC-CC1352-868 uses a PCB antenna (2.4 GHz output) instead the version denominated RC-CC1352-868-UA uses a UFL connector ( see below) :
| Technical Characteristics (Sub 1GHz) | Min | Typ | Max | Unit |
| Supply Voltage | 1.8 | 3.0 | 3.6 | Volt |
| Current Consumption (RX mode) | | 8.10 | | mA |
| Current Consumption (TX Mode +10dBm) | | 13.40 | | mA |
| Current Consumption (TX Mode +14dBm) | | 24.00 | | mA |
| Current Consumption Stand by Mode | | 0.1 | | µA |
| RF Output Power (*) | | +14 | | dBm |
| Operative Frequency | | 868 | | MHz |
| RF Sensitivity (Data Rate 50kbps) | | -110 | | dBm |
| Long Range RF Sensitivity (Data Rate 2.5Kbps) | | -122 | | dBm |
| Data Rate | 0.01 | | 4.0 | Mbit/s |
| Operating Range Temperature | -30 | | 75 | °C |
Ta = 25°C unless otherwise specified
(*) Programmable parameter
Microcontroller
- Power Arm Cortex - M4F processor
- Up to 48MHz Clock Speed
- 352KB of On-System Programming Flash
- 256KB of ROM for Protocol and Firmware
- 8KB od SRAM for Cache (or as General-Purpose RAM)
- 80KB of Ultralow Leakege SRAM
- Support Over-the-Air Upgrade (OTA)
Model: RC-TASK2-868
Description:
ASK/OOK transmitter module with Crystal oscillator.
Vdc: 2.2 ÷ 3.6Volt
Current: 21/15mA
Frequency: 868.30MHz
Power : 10dBm
Dimension: 20.32 x 11.43mm
For more information and details consult the datasheet of the CC1352 chip from Texas Instruments website.
Pin Outs
Mechanical Dimension
Reference Schematic
To make immediate usable the RC-CC1352-868 module with Texas Instruments development systems has been realized the following adapter :
The module including adapter is called RC-CC1352-868-EV, it can be immediately used with the evaluation board
SMART RF 06 from Texas Instruments.
Information Request:
Download Datasheet
Link to Buy Samples
RC-CC1352-868
Link to Buy Samples
RC-CC1352-868-UA
Link to Buy Samples
RC-CC1352-868-EV (with adapter)
Would you be interested in :
